<button id="eduvq"></button>
<rp id="eduvq"></rp>
<button id="eduvq"><acronym id="eduvq"></acronym></button>

  • <s id="eduvq"><object id="eduvq"></object></s>

    1. Hubei Sanfeng Turbine Equipment Co., Ltd.
      Your present location:Home >> Product center >> Centrifugal blower >> AII series centrifugal blower
      • Product name AII series centrifugal blower
      • Product number GF000.5

      Product Introduction
      AII series centrifugal blower is widely used in the industry of environmental protection, metallurgy, chemical industry and so on. The conveying medium is gas, air, SO2 mixed gas and so on.?The series of centrifugal blowers are single stage impeller, double support structure, single inhalation or double intake air intake.?The speed is less than 3000r/min, the flow range is 30020000m3/min, and the boost range is 1045kPa.

      Structural Features
      The shell adopts advanced fluid analysis method to design, the material is cast iron or steel plate welded structure, the upper and lower part, easy to install and overhaul;
      The impeller adopts binary or ternary flow technology design, high efficiency; The rotor group is adjusted by static and dynamic balance, and the operation is stable.
      The sealing structure is mature and reliable, which can effectively prevent gas leakage and meet the requirements of different working conditions.
      The blower adopts rolling bearing or sliding bearing, the rolling bearing adopts grease lubrication or oil lubrication water cooling but the sliding bearing uses pressure forced oil lubrication.

      The Parameter Range


      Inlet Capacity(m³/min)

      Discharger Pressure(kPa)

      Rotating Speed(r/min)


      AII series centrifugal blower






      Ordering Instructions:

      The user needs to provide the following parameters when ordering the fan: the atmospheric pressure or altitude used by the fan, the transmission medium, the medium composition and percentage of medium composition mixed gas, inlet temperature, relative humidity, inlet flow volume flow or mass flow, pressurization, dust content, corrosion resistance explosion resistance and other requirements special gases, and other water, electricity and gas conditions.
      The rotation direction and angle of the fan can be designed according to the requirements of the user to meet the demands of various working conditions of the user. 



      <button id="eduvq"></button>
      <rp id="eduvq"></rp>
      <button id="eduvq"><acronym id="eduvq"></acronym></button>

    2. <s id="eduvq"><object id="eduvq"></object></s>

      1. <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <ı> <ı> <ı> <ı> <ı> <ı>